By Mark Published

HACCP Prerequisite Programmes: What to Check in an Audit

A PRP audit is a check of the hygienic and operational preconditions of food production: it establishes whether the foundation under your CCP and oPRP control holds in practice. You check the implementation and maintenance of the core areas set out in ISO 22002-100 (or a standard such as TS 1.1 under the GMP+ scheme) — from personnel hygiene and infrastructure to cleaning regime, pest control, traceability, product information and food defence. This guide gives, per area, the checkpoint, the typical pitfall and the evidence an external auditor expects. PRPs must be in place before specific oPRP/CCP control becomes meaningful. Unlike oPRPs and CCPs, which vary by product and process, they are largely the same everywhere: one fixed checklist covers them. If the PRP foundation is shaky, everything built on top of it is shaky too — and an auditor doesn't believe procedures, they believe evidence.

What you check

In a PRP audit, you check fourteen areas on the shop floor: infrastructure, personnel hygiene, cleaning, pest control, maintenance/calibration/equipment, water, air and light quality, waste streams, purchasing, allergen and contamination control, traceability, storage and transport, training, product and consumer information, and food defence and food fraud. Work through them in this order:

  1. Infrastructure and environment. Is the building suitable for production (floors, walls, ceilings, lighting, ventilation)? Is crossover between raw and processed prevented? Are storage, production and packing station separated? Check routing drawings, layout and distance to risk sources (drains, waste storage, animal husbandry nearby).
  2. Personnel hygiene. Work clothing, hairnets, hand-washing regime, health declarations, sickness reporting protocol. Ask the pointed question: what procedure applies when someone returns after a gastrointestinal infection? A weak or missing answer is a major NC in a production process with direct food contact.
  3. Cleaning regime. A validated procedure per surface, with frequency, agent, concentration, contact time, rinsing and verification (visual, ATP meter or swab). Check: is the procedure validated, who confirms it works, what data backs that up?
  4. Pest control. Contract with an accredited service provider. Action plans per category encountered (rodents, flies, cockroaches, birds). Monitoring locations with traceable evidence. Ask for the latest inspection report, check whether the traps are functioning, and what happens after a positive monitoring result.
  5. Maintenance, calibration and equipment. Preventive maintenance regime for process equipment. Calibration regime for thermometers, scales, pH meters and metal detectors. Dig deeper: when was magnet X last calibrated, against what reference, by whom? Also check whether equipment is hygienically designed, easily accessible for cleaning and maintenance, and capable of monitoring and verifying relevant parameters (temperature, filtration, humidity).
  6. Water, air and light quality. Drinking water quality at points of direct product contact. Steam quality in processes with food contact. Compressed air composition (filter + condensate) where compressed air contacts food. Ventilation systems must not move air from contaminated to clean zones — check airflow direction and filter maintenance. Lighting must be adequate to detect dirt, defects and contamination, and fixtures must be shielded where there's a risk of breakage. Ask for the analysis results from the last twelve months.
  7. Waste and by-product streams. Segregated storage, segregated routing (not through the production area), removal frequency, contracts with accredited processors. Check: how often is container X emptied, what happens if the waste storage area leaks, how is cross-contact prevented? For reused or recycled materials (pallets, crates, packaging): is there an inspection and cleaning step before reuse, and does the origin stay traceable?
  8. Purchasing raw materials and supplier management. Approval procedure per raw material category. Monitoring of supplier performance (deviations, recalls). Specifications per raw material. Ask: which suppliers are on the approved list, when were they last evaluated, who decides on approval? Also check the receipt itself: are delivery vehicles checked before and during unloading (seal integrity, temperature, pests), and are incoming materials inspected, tested or covered by a CoA/DoC before being released for use?
  9. Allergen and contamination control. Allergen inventory per product and production line. Cross-contamination risk analysis. Cleaning protocol at product changeover. Labelling verification. Ask for evidence that no cross-contact is possible between allergen-containing and allergen-free production. Also look beyond allergens: is there a policy for other physical and chemical contamination (glass and hard plastic policy, metal detection or X-ray inspection, management of cleaning and process chemicals in production areas)?
  10. Traceability and recall. Traceable from raw material to end product within 4 hours. Has the recall procedure been tested, and how often? Run a traceability exercise on the spot: "show me the route from batch X to customer Y." If this takes longer than 4 hours, that's a major NC.
  11. Storage and transport. Temperature regime per product category. Temperature monitoring in chilled and frozen storage. Temperature recording in transport. FIFO or FEFO principle. Review the logbooks from the last three months, the deviations, and how they were handled. Also check whether logistic units are inspected before dispatch for cleanliness, good condition and absence of odours or pests.
  12. Training and competence. Training record per employee per role. Periodic refresher training (typically annual for hygiene and HACCP basics). Check: who received which training and when, how was competence tested, what happens if the result is insufficient?
  13. Product and consumer information. End products must be accompanied by, or carry, sufficient information so that the next link in the chain or the consumer can safely handle, prepare, display, store and use the product. Check: does the label or accompanying documentation clearly state how the product must be stored and prepared safely, and is this information updated with every change to recipe, process or packaging?
  14. Food defence and food fraud. Has a threat assessment (food defence) been carried out against intentional acts such as sabotage, tampering or theft, and is there a current plan with physical security, access control and personnel screening? Has a food fraud vulnerability assessment been carried out, with control measures for vulnerable raw materials or suppliers? Ask about the most recent review, who carried out the assessment, and what measures were taken following the last update.

From practice

During a GMP+ audit, we found a company with procedures on paper for every area checked — complete and formally correct. The audit failed on point 10 (traceability): a hands-on exercise still hadn't produced a complete chain after 6 hours, because one intermediate step sat in a disconnected Excel file. Result: a major NC, combined with the underlying finding that the paper system had never been verified in practice. The corrective action cost three weeks of work; an earlier internal audit should have caught this.

Frequently asked questions

Do I need to cover every PRP requirement in each audit?

For a full annual audit: yes. For targeted internal audits, not necessarily — steer by risk score. But your overall annual programme needs to touch every PRP, or blind spots will form that external auditors will find.

How do I handle oPRPs in the audit?

Check oPRPs along the same line you use for PRPs — checkpoint, pitfall, evidence — and record that the control measure does what it's supposed to do. An oPRP (operational PRP) is a control measure for a specific risk that doesn't rise to CCP level; a separate audit line isn't needed for it.

How long does a full PRP audit take?

For a medium-sized production site: 1–2 full days with one auditor. With prepared checklists in Easy to Inspect, a 30–40% time saving is realistic thanks to structured execution and instantly generated reporting.

Does every PRP need to be verified?

Ideally, yes — you need evidence that the procedure does what it's supposed to do. For cleaning: ATP or microbiological verification. For pest control: monitoring data. Paper alone, with no verification evidence, doesn't hold up in a GFSI audit.

Can I use this checklist in Easy to Inspect?

Yes — we offer a standard template called HACCP-PRP audit that you can adapt per site to your sector and risk profile. You can also build your own specific PRP checks in Easy to Inspect.

About the author

Mark Gijtenbeek — ISO Lead Auditor 9001 / 14001 / 45001, DGSA, SQAS/ESAD assessor. LinkedIn

Try it yourself

Start your free 30-day trial with Easy to Inspect — including a HACCP-PRP checklist template you can use right away or adapt to your site and sector. Get started now.

In this series

  • HACCP Prerequisite Programmes: What to Check?

    What do you check in a PRP audit? 14 core areas, each with its checkpoint, the typical pitfall, and the evidence an external auditor expects.

    Read more